How to downgrade/update the version of firmware---A30

[Admin]

Hi,guys!
Some people ask me how to downgrade the A30 firmware, and I'll share a link .You can download it.

Please note, if not necessary, please do not downgrade easily, new version fixed some problem
https://drive.google.com/open?id=1LIN6n ... p1J1aQbBDf

A30D.png (15.72 KiB) Viewed 63068 times

A30-1.png (8.2 KiB) Viewed 63068 times

A30-V1.25.38 new version update

Toolkits(A30V1.25.38).rar

(15.11 MiB) Downloaded 1795 times

[BikingViking]

Thanks for that, I downgraded and then re-upgraded to see if it would make a difference to my SD Card problems, but in both firmwares it says SD Card removed, but, during the update process, if I enable LCD updating, it writes the LCD firmware to the SD card, so the it is obviously able to communicate with the card and make changes to it through the USB connection even though I can no longer access it from the menu or write to it from any software while installed in the printer.

[seawolf]

HI
can i use custom firmware for the A30 ?
is there and source code for the printer firmware

i have problem with the printer the Temperature Sensor for the HOTEND sum time work and sum time not working
and the Control Box it freeze ther is problem in the frimware there is bugs i thenk
i want the source code so i can fix the problem off the printer please

[nitro_sport2003]

OK thanks was looking for this.

[bini]

Hy,

I have a problem when I upgrade the firmware, and want to go at home, the motors for Z go up at the place to go Down...
Can you help me please.

[Gingko]

Hy,

I have a problem when I upgrade the firmware, and want to go at home, the motors for Z go up at the place to go Down...
Can you help me please.

It seems like Z-axis goes to the opposite direction.
You can use motor tool to change it:
viewtopic.php?f=17&t=60639&p=82054

BTW: New version of firmware has released, check this:
viewtopic.php?f=20&t=60676&p=82222

[steveski21]

Gingko

Is there a release notes or change log on the new firmware somewhere so we know what has been updated ?

[Gingko]

Gingko

Is there a release notes or change log on the new firmware somewhere so we know what has been updated ?

Link of Changelog:
https://github.com/Geeetech3D/Smartto-I ... angelog.md

You can find that in smartto readme page.

[JackPonting]

Many thanks for updating us about how to downgrade the version of firmware. Great to know about it.
Jack
http://www.qualitydissertation.co.uk/

[Rascon54]

Thanks for the step by step tutorial. Works like a charm! The solution worked for me thanks to the community and the members for the solution.
firstcallonline