3Dtouch not working properly?

Post Reply
syrix
Posts: 8
Joined: Sun Jul 30, 2017 6:02 am

3Dtouch not working properly?

Post by syrix » Sun Jul 30, 2017 5:17 pm

Hello guys,

i've installed the Geeetech 3Dtouch sensor on my Geeetech i3 Pro B.

Everything seems fine with the sensor itselft. My problem is, that the first layer (after measurement of the heatbed G29) is not as i expected.
The gap between nozzle and glass is on the right half OK, but on the left half the nozzle touches the glass. i 've attached a photo.

Why is that?
Attachments
20170730_111346.jpg
20170730_111346.jpg (211.74 KiB) Viewed 5478 times
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 3Dtouch not working properly?

Post by William » Mon Jul 31, 2017 5:14 pm

The sensor is not fully tuned in recognizing the distance between nozzle and hotbed.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
syrix
Posts: 8
Joined: Sun Jul 30, 2017 6:02 am

Re: 3Dtouch not working properly?

Post by syrix » Fri Aug 04, 2017 5:54 pm

Hi William,

thank your for your reply. Can you tell me how i can tune the sensor?

greets
Top
Post Reply

Return to “Mods And Hacks”